65+35 cable production line

A,Equipment Application::

The unit is used for copper core insulation coating of middle and small section production,mainly for thermoplastic polypropylene,soft PVC,polyethylene,etc.

B,Main technical parameters

The screw diameter φ65(mm)
The screw length to diameter ratio 25:1
The output SPVC:120kg/h
Before the sheath core diameter φ3~φ20mm
After the cable insulation diameter φ5~φ25mm
Maximum traction 500kg
The length of the sink 12m
Equipment center high 1000mm
The power supply Three-phase 380 plus or minus 10%,50 hz with neutral wire

C,Main technical parameters

φ1600 end of shaft motorized 1 set
φ630 double wheel tensioning device 1 set
SJ-65x25 units came out 1 sets of
Sj35 x article 25 bedroom injection machine 1 sets of
25 co-extrusion head 1 only
Drying and feeding device 1 sets of
Cooling water tank (12 m in cold water tank) Article 1
Blow dry device 1 sets of
TQD-500 tractors 1 set
Spark machine 1 set
Caliper gauge 1 set
φ1600 end shaft line frame 1 set

Scan QR code