Meter is used to measure the length of the cable and other media equipment.Track meter is dragging along after measuring medium sandwiched by two upper and lower tracks.

Walkingthe length of the track is to be measured the length of the medium.Crawler shoe length is the length of therotation off the pitch line,that is,the number of teeth and pitch wheel shoe product.To measure thenumberof turns through the rotation shoe mounted on the shaft encoder active shoe,after conversion can be drawnthrough the length of the media,and recorded.An upper track by hand wheel and screw up and down to thelower track to move up and down through the cylinder.Lift distance to the outer diameter of the medium be-ing measured is determined.

1、 Model：JLDA120

2、 Main technical parameters

1、Applicable wire-coil specification：φ120mm

2、Meter accuracy:≤0.3%

3、Center height：1000mm

4、Cable clamping method:pressing cylinder combined with the screw pressing)

5、Meter Control and Display:arc tooth synchronous track pressing+Encoder+PLC+text display

6、Factory setting coefficient wheel diameter:142.6(accurately trim)

7、Track Specifications:960-8M-70

8、Dimensions(length × width × height)：644x395x1428

LDA Series Vertical Track Meters