A,Equipment Application:
The unit comfortable soft PVC,such as poly(PVC thermoplastic,by hot press method to be extruded insulation or sheath wire conductor layer coated.
B,the line direction
In the face of the nose left put right.
C,production line to the requirement of working environment:
Temperature:0-45 degrees
Power supply:three-phase 380 plus or minus 10%,50 hz with neutral wire.
D,Main technical parameters
The screw diameter
|
120kg
|
The screw length to diameter ratio
|
25:1
|
Extrusion sheath outside diameter
|
φ30~80mm
|
Maximum traction
|
1600kg
|
The production line speed
|
>60m/min
|
Steel specification
|
PN1250-PN2500
|
The line plate specification
|
PN1250-PN2500
|
Equipment center high
|
1000mm
|
E、Main technical parameters
φ2500 end of shaft motorized
|
1 sets of
|
SJ-120x25 plastic extruder
|
1 sets of
|
Automatic drying feeding device
|
1 sets of
|
φ80 square sheathed the nose
|
1 only
|
24m stainless steel water tank (including 4m movable water tank)
|
1 sets of
|
Cable blow dry device
|
1 set
|
TQD-1600kg crawler type pneumatic tractor traction after
|
1 set
|
φ 2500 end shaft line fram
|
1 sets of
|
Electrical control and synchronization control system
|
1 sets of
|
|